ESPEC Brings Semiconductor Reliability Test Systems to PCB West 2026
The Californer/10358452

SANTA CLARA, Calif. - Californer -- ESPEC North America will exhibit at PCB West 2026 at the Santa Clara Convention Center, booth 518, bringing its semiconductor reliability test portfolio to the largest printed circuit board conference in Silicon Valley. The conference runs September 29 through October 2, with the exhibition floor open one day only on Wednesday, September 30.

As semiconductor manufacturing expands across North America, engineers need test methods that catch failure modes standard functional testing misses. Two are increasingly common on dense boards. Electrochemical migration surfaces in the field rather than on the bench, and solder joint fatigue under thermal cycling produces intermittent failures that are expensive to diagnose after shipment.

ESPEC will show two integrated pairings addressing both.

The AMI electrochemical migration evaluation system monitors for gradual resistance drift and sudden migration events, with detection under 100 microseconds. It supports up to 300 channels with independent module control and testing voltages from 100V standard to 2,500V, complying with IPC-TM-650 (2.6.3.3), AEC-Q200, and ISO/IEC 17025. AMI pairs with ESPEC HAST chambers, which combine high temperature, elevated humidity, and positive pressure to accelerate moisture-related failures. Running them together synchronizes electrical measurement with the environmental conditions producing it, in a single test.

More on The Californer

• Heritage at Manalapan Announces Limited-Time Mortgage Rate Buydown on Select Quick Move-In Homes
• Good Organics Now at Pop Up Grocer NYC With October 30 Sampling Event
• KeysCaribbean Announces Temporarily Reduced Rates At Village at Hawks Cay Villas
• Commercial Manufacturing Validation Completed as November 10 FDA Milestone Approaches; Critical FDA Milestone Close: NRx Pharmaceuticals NAS DAQ: NRXP
• Electives Launches "Electives for Everyone," Making Live Expert-Led Learning Available to Every Employee

The AMR conductor resistance evaluation system provides continuous monitoring of solder joint and conductor resistance through thermal cycling, with accuracy of plus or minus 0.5% at 100 mOhm and scaling from 40 to 280 channels. Every unit ships with ISO/IEC 17025-compliant calibration. AMR pairs with the TSE-12 thermal shock chamber, correlating resistance data with temperature transitions as they happen rather than reporting pass or fail at the end of a run.

Both systems are engineered by ESPEC to work with ESPEC chambers. That means synchronized data, simpler setup, and one point of contact for calibration and service.

More on The Californer

• IDEA Week San Diego Kicks Off, Bringing Region's Innovation and Arts Communities Together
• Tax Tops the List as Wealthy Brits Plan Their Exit, La Vida Survey Finds
• Wade Mortenson Photography Publishes Free Beach-by-Beach Family Photo Guides — Swami's 145 Steps
• The Human Stories Behind a Revolutionary Addiction Treatment
• Impact & Influence September 2026: Joel Rodriguez Tirado on Relationships & True Partnership

ESPEC North America is part of ESPEC Corp., the world's largest company dedicated exclusively to environmental test chambers, with ISO 9001:2015 manufacturing certification. The AMI and AMR line originates from ESPEC's Japanese engineering organization and is now expanding into North American labs.

The PCB West exhibition floor runs a single day and the Printed Circuit Engineering Association reports it often sells out. With more than 2,000 attendees, ESPEC recommends scheduling ahead. Engineers can reserve time with the team before September 30 or call 616-896-6100.

About ESPEC
ESPEC Corp. is the world's largest manufacturer of environmental test chambers. ESPEC North America offers a full range of environmental test chambers and related services across the continent.